Havis-shields Slide-Out Trunk Tray 2006-2008 Chevrolet Impala C- Bedienungsanleitung PDF herunterladen

- 1 -

INSTALL INSTRUCTIONS C-3311-2 & C-3311-18-2

SLIDE-OUT TRUNK TRAY

2006-2008 CHEVROLET IMPALA

TOOLS REQUIRED:

7/16” wrench

Powered drill w/ 3/16” drill bit

Ratcheting wrench

Standard socket set

Screwdriver set

HARDWARE:

QTY DESCRIPTION PART #

12 ¼-20 x ¾” Hex head bolts GSM33001

16 ¼” Flat washers GSM31005

12 ¼-20 Serrated nuts GSM30023

4 8-32 x 3/8” Machine Screws GSM33540

4 8-32 Keps Nuts GSM30027

4 ¼” x ¾” Hex head lag bolts (only on C-3311-18-2) GSM33060-1

2 Front Mounting Leg CM001390

1 Rear Driver-side bracket CM001391

1 Rear Passenger-side bracket CM001392

4 Mounting plate w/ pem ¼” pem studs (Use 2 on C-3311-18-2) CM001393

1 P.S. Front Mounting Bracket (only on C-3311-18-2) CM001394

1 P.S. Rear Mounting Adapter Bracket (only on C-3311-18-2) CM93712

Always!

 Read all instructions before installing any Havis-Shields Equipment Corp products.

 Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!

 Use hardware provided with install kit

 For product support, visit the Install Instructions Section of our website at

http://havis.com/Installation/Installation.html

SUB ASSEMBLY: (Use Iso views on page #1 & 2 for sub assemblies)

1 2 3 4

- 1 - INSTALL INSTRUCTIONS C-3311-2 & C-3311-18-2 SLIDE-OUT TRUNK TRAY 2006-2008 CHEVROLET IMPALA TOOLS REQUIRED: 7/16” wren

- 2 - C-3311-2^3311-18-2_INST_9-07 8-32 Screws and hex nutsD.S. Rear Mounting Brackets Fr

Seite 3

- 3 - C-3311-2^3311-18-2_INST_9-07 1. Attach forward mounting legs to the slide out tray.

Seite 4

- 4 - C-3311-2^3311-18-2_INST_9-07 • Tighten all loose hardware. • Be sure tray slides

Keine Kommentare

Havis-shields Slide-Out Trunk Tray 2006-2008 Chevrolet Impala C- Bedienungsanleitung